Your PORTABLE CHILLING SYSTEM has been carefully assembled and engineered to give trouble free service with a minimum of maintenance.
Your unit is self-protecting by a series of safety controls integrated in the control system. These have been timely setto obtain boh adequate protection and optimum efficiency from your unit.
Water temperature is controlled by adjusting the thermostat. Since this is sensing from the chiller vessel inlets it should be set approximately 10° F. above desired leaving water temperature. However, ON NO ACCOUNT must the leaving water temperature be LOWER THAN 45° F.unless a glycol solution is used and adjustments are made to the controls by a qualified refrigeration serviceman.
Other than the thermostat, adjustment of controls and valves by unqualified personnel is done at a very severe risk of permanent damage to the unit loss of efficiency and BROKEN WARRANTY AGREEMENT.
Before you start to install your unit, we urge you to carefully read through and digest this literature to familiarize yourself with its contents.
TO PREVENT PERSONAL INJURY AND/OR DAMAGE TO THE EQUIPMENT, THIS MANUAL SHOULD BE USED FOR REFERENCE ONLY. ANY SERVICE SHOULD BE PERFORMED BY LICENSED SERVICE PERSONNEL QUALIFIED IN THEIR RESPECTIVE FIELDS.